Viconics VTR8300 Line Voltage User Interface Guide Manual do Utilizador Página 21

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 32
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 20
VTR8300 Series
21
User Interface Guide
Viconics Technologies Inc. I Small Building Systems I 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I +1 514 321 5660 I www.viconics.com
028-6045-01 April 2014
© 2014 Viconics Technologies. All rights reserved.
SETPOINT SETTINGS
Configuration parameters
default value
Significance and adjustments
Unocc. cool.
Default value = 26.5 °C
( 80 °F )
Unoccupied cooling setpoint range is:
12.0 to 37.5 °C ( 54 to 100 °F )
Standby cool.
Default value = 25.5 °C
(78 °F )
Standby cooling setpoint. The value of this parameter should be set
between the occupied and unoccupied cooling setpoints. Make sure that
the difference between the stand-by and occupied value can be recovered
in a timely fashion when movement is detected in the zone.
Stand-by cooling setpoint range is: 12.0 to 37.5 °C ( 54 to 100 °F ).
Occ. cool.
Default value = 24.0 °C
( 74 °F )
Cooling setpoint range is:
12.0 to 37.5 °C ( 54 to 100 °F ).
Occ. heat.
Default value = 22.0 °C
( 72 °F )
Heatling setpoint range is:
12.0 to 37.5 °C ( 54 to 100 °F ).
Standby heat.
Default value = 20.5 °C
( 69 °F )
Stand-by heating setpoint. The value of this parameter should be set
between the occupied and unoccupied heating setpoints. Make sure that
the difference between the stand-by and occupied value can be recovered
in a timely fashion when movement is detected in the zone.
Stand-by heating setpoint range is: 4.5 to 32.0 °C ( 40 to 90 °F ).
Unocc. heat.
Default value = 16.5 °C
( 62 °F )
Unoccupied heating setpoint range is:
4.5 to 32.0 °C ( 40 to 90 °F ).
PARAMETER DETAILS
1/2 Setpoints
Occ. cool.
Standby cool.
Unocc. cool.
25.5 °C
24.0 °C
22.0 °C
20.5 °C
16.5 °C
26.5 °C
Occ. heat.
Standby heat.
Unocc. heat.
Vista de página 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentários a estes Manuais

Sem comentários