Viconics VT7606E Installation Manual Manual do Utilizador descarregar pdf (Página 7)

7 | PIR Ready VT7600 Series-Installation Guide

028-0363-02

typIcal applIcatIons

Main outputs wiring

Wiring notes:

Note 1: If the same power source is used for the heating stages, install

jumper across RC & RH. Maximum current is 2.0 amps.

Note 2: Economizer and all analog outputs and inputs use a half bridge

rectier. Reference of the control signal is the common of the

power supply of the Terminal Equipment Controller. (Terminal C).

Note 3: Electromechanical contacts are to be used with the digital inputs.

Electronic triacs cannot be used as mean of switching for the

input. The switched leg to the input for the input to activate is

terminal C (common)

Note 4: The transformer of the unit provides power to the Terminal Equip-

ment Controller and the additional loads that will be wired to the

Terminal Equipment Controller.

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Sem comentários

Viconics VT7606E Installation Manual Manual do Utilizador Página 7